Sharp MX-B382 - Page 51

SHARP
REPAIR HINTS
51
IMAGE SEND (Cont’d)
MX-B382
MX-FXX3
Is it possible to pre-programme the
PBX number required to obtain an
outside line, in order to use a common
or global (LDAP) address book when
sending a fax?
To preset the PBX number to obtain an outside line
when sending a fax, change the following soft switch
control:-
1. Enter SIM66-01
2. Enable PBX Setting from OFF to ID NUMBER by
changing SW68, Bit 7 & 8 from 00 to 10.
3. Enter the binary value for the number required
for an outside line using SIM 66-01, SW69 bit 1
to 4:-
For example, set SW69 bit 1-4 from 0000 to
1001 to dial 9.
DATA SECURITY KIT
MX-FR26U
MX-B382P
MODEL NOT MATCH error after
installing the MX-FR26U Data Security
Kit
This error is caused by a DSK Boot Rom defect.
Download corrective DSK Firmware from the support
website (Repair Hints) and perform an emergency
update procedure.
SHARPDESK MOBILE
MX-B382
Unable to connect to Office 365 email
account when using Sharpdesk Mobile
v2.0
When using Office 365, you need to specify the
following information within Email Server Settings on
Sharpdesk Mobile:-
Hostname: m.outlook.com
Port Number: 993
SSL: ON
Which options are required when
using Sharpdesk Mobile via a wireless
access point?
None.
SharpDesk Mobile is not displayed
within the Windows Store Search
Results.
The SharpDesk Mobile application is not displayed
when searched from the Windows Store if your mobile
device’s language setting is set to one of the languages
that Sharpdesk mobile does not support.
Change your language to English (US) or English
(Australia) and then re-search.