4 Remove the jammed paper.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching it.
Note: Make sure that all paper fragments are removed.
5 Insert the imaging unit.
6 Close the front door, and then insert the tray.
7 Open the rear door.
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a
hot component, allow the surface to cool before touching it.
8 Remove the jammed paper.
Note: Make sure that all paper fragments are removed.
Troubleshoot a problem 89
To Next Page
Loading...
Need help?
General
