16
BEFORE USING THE MACHINE
ADJUSTING THE VOLUME
You can adjust the volume of sounds generated by the machine. Tap the [Settings] key and configure the following
settings from the [System Settings] tab.
(Administrator rights are required.)
► Setting mode when an administrator is logged in (page 58)
Setting Settings
Image Send Settings - Common Settings -
Condition Settings - Scan Complete Sound Setting
Configure settings for the sound that is generated at the
completion of scanning when using the fax, scan, or other image
send function.
Image Send Settings - Fax Settings - Default Settings -
Speaker Settings
For fax, configure settings for the on-hook (speaker) volume,
ringing sound, line monitor, reception completed sound, sending
completed sound, and send/receive error sound.
Image Send Settings - Internet Fax Settings -
Default Settings - Speaker Volume Settings
Configure settings for sounds generated when an Internet fax is
received and when a communication error occurs.
Document Filing Settings - Condition Settings -
Scan Complete Sound Setting
Configure settings for the sound that is generated at the
completion of scanning when using the document filing function.
Common Settings - Operation Settings - Condition
Settings - Key Operation Settings
Configure settings for the sound generated when a key is tapped,
and whether a sound is generated when the key for a default
setting is tapped.
Cancel
Init. install.
Settings
Status
Settings
Home Screen
Settings
Copy Settings Printer
Settings
Image Send
Settings
Document Filing
Settings
Sharp OSA
Settings
Common
Settings
Energy Save
Network
Settings
Security
Settings
System Control Image Quality
Adjustment
System Settings
Sitemap
Administrator Login
System SettingsUser Control
Top of Page
Easy
Copy
LINE LINE PRINTER
Job Status
Volume
Job Status
To Next Page
Loading...
Need help?
General
