COPIER
31
COPYING ON SPECIAL PAPER
(Bypass Copy)
This section explains how to load 8-1/2" x 11" heavy paper in the bypass tray.
1
Load paper into the bypass tray.
► Bypass tray (page 20)
2
Select settings in the touch panel.
(1)
If the multipurpose tray settings are
different from the paper to be printed on,
tap the [Change] key and go to (2).
If the same, tap the [OK] key.
(2)
Tap the [Heavy Paper 1] or [Heavy Paper 2]
key.
Tap the [Heavy Paper 1] key if the paper is 28 lbs.
bond to 65 lbs. cover (106 g/m
2
to 176 g/m
2
), the
[Heavy Paper 2] key if the paper is 65 lbs. cover to
80 lbs. cover (177 g/m
2
to 220 g/m
2
).
(3) Tap the [Size] tab.
(4) Tap the [8-1/2" x 11] key.
(5) Tap of "Tray Settings".
Settings
Toner Quantity Bk
8½ x11
8½ x 11 7½ x 10½
A4 A5
8½ x 14 8½ x13½
5½ x 8½
8 ½x13
2
/
5
8½ x 13
(3)
(5)
(4)
Job Status
Settings
Toner Quantity Bk
Job Status
Easy
Copy
Current Bypass Tray Settings
are as follows.
Type:
Tap [Change] to change current paper
setting and select other paper types.
Change OK
Size: 8½x11
Plain Paper 1
(60 - 79 g/m
2
)
Settings
To Next Page
Loading...
Need help?
General
