18
BEFORE USING THE MACHINE
LOAD PAPER INTO THE TRAY 1 - 4
1
Tray 1
Tray 2 - 4
Pull out the paper tray.
Gently pull the tray out until it stops.
To load paper, go to step 3. To load a different size of
paper, go to the next step.
When using the tray 1, push the center of the pressure plate down until it locks into place.
2
Adjust guide plates A and B to match
the longitudinal and transversal
dimensions of the paper to be loaded.
The guide plates A and B are slidable. Squeeze the
separator plate lever and slide to the desired paper size.
Adjust to the non-standard paper size so that the paper will
not be too loose or too tight.
To Next Page
Loading...
Need help?
General
