EasyManuals Logo

Sharp MX-B467P Quick Reference

Sharp MX-B467P
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
View the Wi
Fi Direct SSID. From the control panel, navigate
to:
Settings >
> Network/Ports > > Wi
Fi Direct >
> SSID >
View the preshared key (PSK). From the control panel, navigate
to:
Settings >
> Network/Ports > > Wi
Fi Direct >
> Set PSK >
Connecting using WiFi Direct
1
From the mobile device, go to the settings menu.
2
Enable Wi
Fi, and then tap Wi
Fi Direct.
3
Select the printer SSID.
4
Confirm the connection on the printer control panel.
Connecting using WiFi
1
From the mobile device, go to the settings menu.
2
Tap Wi
Fi, and then select the printer SSID.
Note: The string “DIRECT-xy” (where xy are two random
characters) is added before the SSID.
3
Enter the preshared key.
Note: The preshared key is the password.
Clearing jams
Avoiding jams
Load paper properly
Make sure that the paper lies
flat
in the tray.
Correct loading of paper Incorrect loading of paper
Do not load or remove a tray while the printer is printing.
Do not load too much paper. Make sure that the stack height
is below the maximum paper fill indicator.
Do not slide paper into the tray. Load paper as shown in the
illustration.
Make sure that the paper guides are positioned correctly and
are not pressing tightly against the paper or envelopes.
Push the tray firmly into the printer after loading paper.
Use recommended paper
Use only recommended paper or specialty media.
Do not load paper that is wrinkled, creased, damp, bent, or
curled.
Flex, fan, and align the paper edges before loading.
Do not use paper that has been cut or trimmed by hand.
Do not mix paper sizes, weights, or types in the same tray.
Make sure that the paper size and type are set correctly on the
computer or printer control panel.
Store paper according to manufacturer recommendations.
Identifying jam locations
Notes:
When Jam Assist is set to On, the printer automatically
flushes blank pages or partially printed pages after a
jammed page has been cleared. Check your printed output
for blank pages.
When Jam Recovery is set to On or Auto, the printer reprints
jammed pages.
4

Other manuals for Sharp MX-B467P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp MX-B467P and is the answer not in the manual?

Sharp MX-B467P Specifications

General IconGeneral
BrandSharp
ModelMX-B467P
CategoryPrinter
LanguageEnglish

Related product manuals