MX-C250 DISASSEMBLY AND ASSEMBLY 10 – 9
5) While holding the handle of the Primary transfer unit, remove
the Secondary transfer unit by pressing the lock of the Primary
transfer unit.
*
J. LSU
1) Remove the left cabinet. .
2) Pull out the LSU unit and remove the FFC and the harness by
referring the following procedures.
* Remove the FFC by releasing the lock of the FFC connector.
When the connection part of the connector is lifted up as shown
in the figure, the connector is unlocked. It is necessary to
remove the FFC with releasing the lock of the connector.
Parts
1 LSU unit
1
1 ‘13
/Aug
2
‘13
/Oct
2
To Next Page
Loading...
