Sharp MX-C311 Maintenance & Safety Guide

30
REPLACING SUPPLIES AND MAINTENANCE
6
Replace the staple case.
Push the staple case in until it clicks into place.
7
Slide the finisher back to the right.
Gently slide the finisher back to the right until it locks into its original position.
8
Close the cover.
Take care that your fingers are not pinched when closing the cover.
Make a test print or copy in staple sort mode to verify that stapling takes place
correctly.
mxc401_us_saf.book 30 ページ ２００８年１０月１５日 水曜日 午前１１時５２分

Sharp MX-C311 Specifications

General

Brand	Sharp
Model	MX-C311
Category	All in One Printer
Language	English