Sharp MX-C357F - Sending a Fax

Note: These instructions apply only to printers that support analog fax.
1 From the control panel, navigate to:
Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls > Answer On
For non-touch-screen printer models, press
to navigate through the settings.
2 Select a ring pattern.
Setting the fax date and time
1 From the control panel, navigate to:
Settings > Device > Preferences > Date and Time > Configure
For non-touch-screen printer models, press
to navigate through the settings.
2 Configure the settings.
Configuring daylight saving time
1 From the control panel, navigate to:
Settings > Device > Preferences > Date and Time > Configure
For non-touch-screen printer models, press
to navigate through the settings.
2 From the Time Zone menu, select (UTC+user) Custom.
3 Configure the settings.
Sending a fax
Using the control panel
1 Load the original document into the ADF tray or on the scanner glass.
2 From the control panel, select Fax, and then enter the needed information.
3 If necessary, configure other fax settings.
4 Fax the document.
Using the computer
Note: Make sure that the Universal Fax driver is installed.
For Windows users
1
From the document that you are trying to fax, open the Print dialog.
2 Select the printer, and then click Properties, Preferences, Options, or Setup.
3 Click Fax > Enable fax, and then enter the recipient number.
Faxing 59