Sharp MX-C507P - Page 114

5028
200 paper jams
200 paper jam messages
Diagnostics and troubleshooting
80
Error code
Description
Action
200.05
Paper fed from the MPF never cleared the sensor
(input).
See “Sensor (input): Paper failed to clear
service check” on page 83 .
200.12
Paper fed from tray 1 was detected earlier than
expected at the sensor (input).
See “Sensor (input): Paper arrived too early
service check” on page 81 .
200.13
Paper fed from tray 1 never arrived at the sensor
(input).
See “Sensor (input): Paper failed to arrive
service check” on page 81 .
200.14
Paper fed from tray 1 cleared the sensor (input)
earlier than expected.
See “Sensor (input): Paper cleared too early
service check” on page 84 .
200.15
Paper fed from tray 1 never cleared the sensor
(input).
See “Sensor (input): Paper failed to clear
service check” on page 83 .
200.22
Paper fed from tray 2 was detected earlier than
expected at the sensor (input).
See “Sensor (input): Paper arrived too early
service check” on page 81 .
200.23
Paper fed from tray 2 did not reach the sensor
(input).
See “Sensor (input): Paper failed to arrive
service check” on page 81 .
200.24
Paper fed from tray 2 cleared the sensor (input)
earlier than expected.
See “Sensor (input): Paper cleared too early
service check” on page 84 .
200.25
Paper fed from tray 2 never cleared the sensor
(input).
See “Sensor (input): Paper failed to clear
service check” on page 83 .
200.32
Paper fed from tray 3 was detected earlier than
expected at the sensor (input).
See “Sensor (input): Paper arrived too early
service check” on page 81 .
200.33
Paper fed from tray 3 did not reach the sensor
(input).
See “Sensor (input): Paper failed to arrive
service check” on page 81 .
200.34
Paper fed from tray 3 cleared the sensor (input)
earlier than expected.
See “Sensor (input): Paper cleared too early
service check” on page 84 .
200.35
Paper fed from tray 3 never cleared the sensor
(input).
See “Sensor (input): Paper failed to clear
service check” on page 83 .
200.42
Paper fed from tray 4 was detected earlier than
expected at the sensor (input).
See “Sensor (input): Paper arrived too early
service check” on page 81 .
200.43
Paper fed from tray 4 did not reach the sensor
(input).
See “Sensor (input): Paper failed to arrive
service check” on page 81 .
200.44
Paper fed from tray 4 cleared the sensor (input)
earlier than expected.
See “Sensor (input): Paper cleared too early
service check” on page 84 .
200.45
Paper fed from tray 4 never cleared the sensor
(input).
See “Sensor (input): Paper failed to clear
service check” on page 83 .
200.91
Paper remains detected at the sensor (input) after
the printer is turned on.
See “Sensor (input) static jam service
check” on page 85 .