Sharp MX-C507P - Page 122

5028
202 paper jams
202 paper jam messages
Diagnostics and troubleshooting
88
Error code
Description
Action
202.12
Paper fed from tray 1 was detected earlier than
expected at the sensor (fuser exit).
See “Sensor (fuser exit): Paper arrived too
early service check” on page 89 .
202.13
Paper fed from tray 1 never arrived at the sensor
(fuser exit).
See “Sensor (fuser exit): Paper failed to arrive
service check” on page 89 .
202.14
Paper fed from tray 1 cleared the sensor (fuser
exit) earlier than expected.
See “Sensor (fuser exit): Paper cleared too
early service check” on page 93 .
202.15
Paper fed from tray 1 never cleared the sensor
(fuser exit).
See “Sensor (fuser exit): Paper failed to clear
service check” on page 92 .
202.22
Paper fed from tray 2 was detected earlier than
expected at the sensor (fuser exit).
See “Sensor (fuser exit): Paper arrived too
early service check” on page 89 .
202.23
Paper fed from tray 2 never arrived at the sensor
(fuser exit).
See “Sensor (fuser exit): Paper failed to arrive
service check” on page 89 .
202.24
Paper fed from tray 2 cleared the sensor (fuser
exit) earlier than expected.
See “Sensor (fuser exit): Paper cleared too
early service check” on page 93 .
202.25
Paper fed from tray 2 never cleared the sensor
(fuser exit).
See “Sensor (fuser exit): Paper failed to clear
service check” on page 92 .
202.32
Paper fed from tray 3 was detected earlier than
expected at the sensor (fuser exit).
See “Sensor (fuser exit): Paper arrived too
early service check” on page 89 .
202.33
Paper fed from tray 3 never arrived at the sensor
(fuser exit).
See “Sensor (fuser exit): Paper failed to arrive
service check” on page 89 .
202.34
Paper fed from tray 3 cleared the sensor (fuser
exit) earlier than expected.
See “Sensor (fuser exit): Paper cleared too
early service check” on page 93 .
202.35
Paper fed from tray 3 never cleared the sensor
(fuser exit).
See “Sensor (fuser exit): Paper failed to clear
service check” on page 92 .
202.42
Paper fed from tray 4 was detected earlier than
expected at the sensor (fuser exit).
See “Sensor (fuser exit): Paper arrived too
early service check” on page 89 .
202.43
Paper fed from tray 4 never arrived at the sensor
(fuser exit).
See “Sensor (fuser exit): Paper failed to arrive
service check” on page 89 .
202.44
Paper fed from tray 4 cleared the sensor (fuser
exit) earlier than expected.
See “Sensor (fuser exit): Paper cleared too
early service check” on page 93 .
202.45
Paper fed from tray 4 never cleared the sensor
(fuser exit).
See “Sensor (fuser exit): Paper failed to clear
service check” on page 92 .
202.91
Paper remains detected at the sensor (fuser exit)
after the printer is turned on.
See “Sensor (fuser exit) static jam service
check” on page 94 .