Sharp MX-M182D User Manual

MX-M182 DISASSEMBLY AND ASSEMBLY 10-6
E. Upper heat roller
Disassembly: There are three pawls on the fusing cover. Remove the
screws and slide the fusing cover to the right to remove.

The heater lamp is fixed on the fusing cover with a
screw. Slide the fusing cover to the front and remove the
screw, then remove the heater lamp.
Note:It is grease (JFE552) application on a fusing frame metal plate part.
(Degree to thinly)
F. Separation pawl
G. Lower heat roller
Assembly: When assembling the fusing front paper guide (3),
temporarily fix the paper guide fixing plate with the screw so
that the paper guide fixing plate (2) is in contact with the
fusing lower frame bottom (A).

Align the edge (B) of the fusing front paper guide (3) with the
top (C) of the rib, and fix them securely with screws.
(1)
(3)
(2)
(1)
(2)
(1)
(1)
(2)
Grease(JFE552)
Floil(GU2)
(1)
(2)
(3)
(2)
(3)
(2)
(3)
(2)
(3)
(1)
(1)
(3)
(2)
(2)
(A)
(4)
Grease
(JFE552)
(C)
(B)

Sharp MX-M182D Specifications

General

Brand	Sharp
Model	MX-M182D
Category	Printer
Language	English