Sharp MX-M264N Technical Handy Guide

Test Simulations
19
DocumentSolutionsAfterSalesService
Main Sub Functions
10 1 Check the operations of the toner supply mechanism (toner motor).
13 - Cancel the self-diag "U1" trouble.
14 - Cancel the self-diag H3, H4, H5 troubles.
16 - Cancel the self-diag "U2" trouble. MFP PWB / PCU PWB / SCU PWB
17 - Cancel the self-diag "PF" trouble.
21 1 Set the maintenance cycle.
22 1 Check the print count value in each section and each operation mode.
2 Check the total number of misfeed and troubles.
3 Check misfeed positions and the misfeed count of each position.
5 Check the ROM version of each unit (section).
6 Output the setting/adjustment data (simulation, FAX soft switch, counter).
8 Check the number of operations (counter value) of the finisher, the RSPF.
9 Check the number of use (print quantity) of each paper feed section.
10 Check the system configuration (option, internal hardware).
11 Check the use frequency (send/receive) of FAX. (Only when FAX is installed).
12 Check the RSPF misfeed positions and the number of misfeed at each position.
13 Check the operating time of the process section.
14 Display the use status of the toner cartridge.
18 Display the user data delete history.
19 Check the values of the counters related to the scan - image send.
40 Display the error code list and the contents.
90 Output the various set data lists.
23 2 Output the trouble history list of paper jam and misfeed.
80 Check the operation of paper feed and paper transport in the paper feed section
and the paper transport section. Used to output the list of the operation status of
the sensor and the detectors in the paper feed section and the paper transport
section.
24 1 Clear the jam counter, and the trouble counter.
2 Clear the number of use (the number of prints) of each paper feed section.
3 Clear the finisher, RSPF, and the scan (reading) unit counter.
4 Clear the maintenance counter, the printer counters of the transport unit and the
fusing unit. (After completion of maintenance, clear the counters.)
5 Clear the developer counter. (After replacement of developer, clear the counter.)
6 Clear the copy counter.
9 Clear the printer mode print counter and the self print mode print counter.
10 Clear the FAX counter. (Only when FAX is installed)
12 Clear the document filing counter value.

Sharp MX-M264N Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	26 ppm
Max Print Resolution	600 x 600 dpi
Standard Paper Capacity	1100 sheets
Max Paper Capacity	2100 sheets
Automatic Duplexing	Yes
ADF Capacity	100 sheets
Scan Resolution	600 x 600 dpi
Copy Speed	26 cpm
Copy Resolution	600 x 600 dpi
Connectivity	Ethernet, USB