Sharp MX-M264N Technical Handy Guide

Test Simulations
23
DocumentSolutionsAfterSalesService
Main Sub Functions
56 5 Import the SIM22-6 data to a USB memory in the TEXT format.
11 Save the data in the SD card to the HDD temporarily.
12 Copy the SD card data saved temporarily in the HDD with SIM56-11 to the
machine.
60 1 Check the memory operations (read/write) of the MFP PWB.
61 1 Check the LSU polygon motor rotation and laser detection.
3 Set the laser power
62 1 Format the hard disk. (HDD: Excluding the Op manual and watermark data)
2 Check read/write of the hard disk (partial).
3 Check read/write of the hard disk (all areas).
6 Perform the self diagnostics of the hard disk.
7 Print the hard disk self diagnostics error log.
8 Format the hard disk. (HDD: Excluding the Operation Manual, the watermark data,
and the system area)
10 Clear the job completion list data.
11 Delete the document filing data.
12 Set Enable/Disable of auto format in a hard disk trouble.
13 Used to format the hard disk. (Operation Manual, watermark data only)
14 Initialize (remake) only the database file of the HDD.
63 1 Display the shading correction result.
2 Perform shading.
3 Perform scanner (CCD) colour balance and gamma auto adjustment.
4 Display the SIT chart patch density.
5 Perform the scanner (CCD) colour balance and gamma default setting.
64 2 Test print. (Self print) (Monochrome mode)
4 Printer test print. (Self print)
5 Printer test print. (Self print) (PCL)
6 Printer test print. (Self print) (PS)
65 1 Adjust the touch panel (LCD display section) detection coordinates.
2 Display the touch panel (LCD display section) detection coordinates.
5 Check the operation panel key input.
66 1 Display the FAX-related soft SW (2 - 150) on the LCD.
2 Enter a country code and set the default value for the country code.
3 Check read/write of the EEPROM and the SDRAM on the MODEM controller and
display the result.
4 Send the selected signals to the line and the main unit speaker. (Send level: max.)
5 Send the selected signal to the line and the main unit speaker. (Send level: Soft
SW setting) (For the kinds of send signals, refer to SIM66-04.)
6 Print the confidential registration check table (BOX NO., BOX name, passcode. (If
there is no confidential registration, no print is made.)

Sharp MX-M264N Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Print Speed	26 ppm
Max Print Resolution	600 x 600 dpi
Standard Paper Capacity	1100 sheets
Max Paper Capacity	2100 sheets
Automatic Duplexing	Yes
ADF Capacity	100 sheets
Scan Resolution	600 x 600 dpi
Copy Speed	26 cpm
Copy Resolution	600 x 600 dpi
Connectivity	Ethernet, USB