Sharp MX-M354N Operation Manual

2-56
COPIER
Contents
INSERTING COVERS IN COPIES (Cover Settings)
This function requires the automatic document feeder.
A different type of paper can be inserted at the positions corresponding to the front and back covers of a copy job.
This is useful for arranging documents in an attractive format and for using a different type of paper as a cover on an
estimate sheet or similar document.
Covers can be used in combination with inserts.
Copying on a front cover and inserting together with a back cover
1
Insert the originals face up in the
document feeder tray.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
The document glass cannot be used.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the [Covers/Inserts] key.
☞ Special modes menu (1st screen) (page 2-37)
3
Touch the [Front Cover] key.
5
4
2 3 4 51
3
2
1
AAA
AAA
Originals
Front cover paper Back cover paper
Front cover
Back cover
Copies
Indicator line
Special Modes
OK
Cancel
OK
Front
Cover
Back
Cover
Insertion
Type B
Insertion
Type A
Insertion
Settings
Tray Settings
Inserts Setting
Cover Setting
Covers/Inserts
Page Layout

Sharp MX-M354N Specifications

General

Functions	Print, Copy, Scan, Fax
Print Speed	35 ppm
Print Resolution	1200 x 1200 dpi
Copy Speed	35 cpm
Copy Resolution	600 x 600 dpi
Scan Resolution	600 x 600 dpi
Fax Transmission Speed	33.6 Kbps
Fax Resolution	400 x 400 dpi
Maximum Paper Size	A3
Duplex Printing	Yes
Warm-up Time	20 seconds
Memory	1 GB
Connectivity	USB 2.0, Ethernet