Sharp MX-M354N - INCREASING the MARGIN (Margin Shift)

3-35
PRINTER
Contents
INCREASING THE MARGIN (Margin Shift)
This function is used to shift the print image to increase
the margin at the left, right, or top of the paper. This is
convenient when you wish to staple the output but the
binding area overlaps the text. When a finisher is
installed, the staple function can be used with this
function.
(1) Configure the settings on the [Main] tab.
(2) Select the "Binding Edge".
For Pamphlet Style setting only.
(3) Select the "Margin Shift".
Select from the "Margin Shift" menu. If you wish to
configure another numeric setting, select the setting from
the pull-down menu and click the [Settings] button. Click
the button or directly enter the number.
(1) Select [Printer Features].
(2) Select the "Binding Edge".
(3) Select the "Margin Shift".
Windows
(3)
(2)
(1)
Macintosh
(3)
(1)
(2)