Sharp MX-M503N - Frequently Asked Questions

108
FREQUENTLY ASKED QUESTIONS
Making a copy of a non-standard size original
The procedure for making a copy of a payment slip or other non-standard
size original is explained below.
The "Centring" special mode of copy mode can be selected to position the
copied image in the centre of the paper.
X
Y
Or
i
g
i
na
l
Si
ze Inpu
t
O
K
O
K
Ca
n
cel
(25-432)
mm
200
150
(25-297)
mm
1 Place the originals. 2 Enter the original size.
From the base screen of copy mode,
touch [Original] then [Size Input].
If the X dimension
(width) of the
document is less than
140 mm (5-1/2") or
the Y dimension
(height) is less than
131 mm (5-5/32"),
place the original on
the document glass.
For a thin original,
use "Slow Scan
Mode".
Paper Select
Cancel
Plain
Pre-Punched
Heavy Paper
Pre-Printed
Colour
Transparency
Recycled
Thin Paper
Tab Paper
Letter Head
Labels
Envelope
Heavy Paper: 106 - 209 g/m
2
(28 lbs.bond, 110 lbs.index)
Bypass Tray Type/Size Setting
Select the paper type.
1
2
Paper Select
Paper Tray
Bypass Tray
OK
Recycled
Plain
Plain
2. A4R
A4
3. B4
4. A3
1.
Plain
A4
Plain
3 Place paper in the bypass tray. 4 Select the bypass tray.
From the base screen of copy mode,
touch [Paper Select] and then "Bypass
tray paper type".
Type : Recycled
Size : A4
The bypass tray is used here to copy
onto paper that is not loaded in any of
the paper trays of the machine.
08-1_Quick(Trouble).fm 108 ページ ２００９年３月１１日 水曜日 午後３時３５分