Sharp MX-M550U

MX-M700N PAPER TRANSPORT SECTION G – 8
B. Vertical paper transport section 2
(1) Resist roller unit
1) Open the front door, and open the process cover. Remove the
process unit.
2) Remove the paper dust removing unit.
3) Remove the rear frame side cover, and disconnect the con-
nector.
No. Unit No. Parts
Mainte
nance
(1) Resist roller unit a Resist roller (Idle) ✕ {
b Resist roller brake clutch
c Transport roller 15 ✕ {
d Resist roller (Drive) ✕ {
e Resist roller front paper pass
detector
(2) Others a Paper dust cleaner ✕▲
(2)-a
(1)-a
(1)-b
(1)-d
(1)-c
(1)-e
(1)