Sharp MX-M550U

MX-M700N TONER SUPPLY SECTION K – 4
(3) Others
a. Toner motor 2
1) Remove the toner bottle. (See “(1) Toner bottle unit”)
2) Remove the toner hopper unit. (See “(2) Toner hopper unit”)
3) While pressing the bottle coupling, turn it 90 degrees to the left
and remove it. Remove the spring.
4) Disconnect the connector, and remove the toner motor unit.
5) Remove the toner motor 2.
4. Maintenance
✕: Check {: Clean ▲: Replace U: Adjust ✩: Lubricate : Shift position
(Clean, replace, or adjust according to necessity.)
55ppm (PM: 250K)
When
calling
250
K
500
K
750
K
1000
K
1250
K
1500
K
1750
K
2000
K
Remark/Refer to the
Parts Guide.
Block/Item No.
(Only the replacement
parts are described.)
62ppm/70ppm (PM: 300K)
300
K
600
K
900
K
1200
K
1500
K
1800
K
2100
K
2400
K
Unit name No. Part name
Developing section 1 Toner bottle Assembly when installing/
Replacement by user when
empty
2 Toner hopper { {{{{{{{{Clean the shutter area.
1
2