What is the part code for the Staple
Cartridge Holder and/or Staple Unit?
MXFN14: Staple cartridge : 0CW4A36502001
Staple unit : 0CWFM44697001
MXFN15, MXFN16:
Staple Cartridge: 0EUCAS0601L//
The MXFN16 Saddle Finisher is not
recognised by the MFP
Check the DIP Switches on the Finisher Control PWB.
Ensure all DIP switches are set to OFF (Down).
File name cannot be customised when
using Sharp OSA-Network Scanner Tool
v1.1
Download an updated web module from the Sharp support
website and copy it into the Sharp OSA-Network Scanner
Tool Host Installation Folder:-
eg. C:\Program Files\Sharp\Sharp OSA Network
Scanner Tool Host\OSANSTWeb\bin
Afterwards, reboot the Host Server/PC.
Unable to enter the URLs for EAM
(External Accounting Mode) as the
item is missing from the webpage,
even though MXAMX3 is enabled.
Check the setting for Sim 26-03 (Coin Vendor Mode).
Ensure OUTSIDE AUDITOR is configured to None.
Is it possible to activate a trial mode
for Sharp OSA?
Sharp OSA trial mode supporting most functions can be
enabled by executing Sim 26-74 (restricted to approx 18000
pages, including print/scan/copy/image send).
Note: Metadata & Open USB is not supported.
Which additional options are required
for full functionality when using
Sharpdesk Mobile via a wireless access
point?
Only MX-PKX1 is required.
Unable to connect to Office 365 email
account when using Sharpdesk Mobile
v2.0
When using Office 365, you need to specify the following
information within Email Server Settings on Sharpdesk Mobile:-
Hostname: m.outlook.com
Port Number: 993
SSL: ON
To Next Page
Loading...
