1-33
BEFORE USING THE MACHINE
CHANGING THE PAPER SIZE IN PAPER TRAY 3
3
Gently push tray 3 into the machine.
Push the tray firmly all the way into the machine.
4
Set the paper type.
If the paper size was changed from an inch size to an AB size, or from an AB size to an inch size, or if the paper type was
changed, be sure to change the appropriate settings as explained in "Paper Tray Settings" (page 7-13) in the System
Settings.
5
Loading paper in paper tray 3 is now complete.
1
Pull out paper tray 3.
If paper remains in the tray, remove it.
2
Adjust the guide plates A and B by
squeezing their lock levers and sliding
them to the paper size to be loaded.
The guide plates A and B are slidable. Adjust them to the paper
size to be loaded while squeezing their lock levers.
3
Load paper into the tray.
4
Gently push tray 3 into the machine.
Push the tray firmly all the way into the machine.
5
Set the paper type of the paper that was loaded in tray 3.
Be sure to change the appropriate settings as explained in "Paper Tray Settings" (page 7-13) in the System Settings.
If you changed the paper size, be sure to change the paper size setting. An incorrect paper size setting will cause the wrong
paper to be automatically selected and may prevent printing or cause misfeeds.
To Next Page
Loading...
Need help?
General
