Why does my Sharp MX-M850 All in One Printer not print after reception?
If a message appears on the display indicating that you need to add toner or paper, printing will not be possible. Restore printing capability by following the instructions provided in the message.
What to do if my Sharp All in One Printer transmitted fax prints out blank at the receiving side?
Ensure the original is placed correctly (face up or face down, as required by the sending method) and send the fax again.
What to do if transmission does not take place on my Sharp MX-M850 due to file size?
If your administrator has set a limit on the size of transmitted files, a file that exceeds the limit cannot be transmitted. Check with your administrator. Reduce the size of the file attachment by reducing the number of pages scanned or by scanning using a lower resolution setting. You can also ask your mail server administrator what the file size limit is for one e-mail transmission. If the destination folder is not configured as a shared folder, select "share" in the folder properties. If the folder was moved or otherwise changed, the "share" setting may have been canceled.
General| Print Resolution | 1200 x 1200 dpi |
|---|---|
| Connectivity | Ethernet, USB |
| Copy Resolution | 600 x 600 dpi |
| Functions | Copier, Printer, Scanner |
| Print Speed | 85 ppm |
| Scanner Type | Color |
| Display | 10.1-inch color touch-screen |
| Hard Drive | 320 GB |
| Scan Resolution | 600 dpi |
| Copy Speed | 85 ppm (black) |
| Network Connectivity | Ethernet (10Base-T/100Base-TX/1000Base-T) |
| USB Connectivity | USB 2.0 |
| Operating Systems Supported | Windows |
To Next Page
