Sharp MZ-800 - (4) Colour palette

Colour code Colour
0 Black
1 Blue
2 Red
3 Magenta
4 Green
a Cyan
6 Yellow
7 White
8 Gray
9 Light blue
10 Light red
ll Light magenta
12 Light green
13 Light cyan
14 Light yellow
15 Light white
| (high brightness white)
In mode 1 or mode 4, palette codes 0 to 3 are used. The initial settings of colour code assignments
to the palette codes are as shown below.
[ Palette code | Colour code (colour)
|
0 0 (black)
1 1 (blue)
2 2 (red)
; 3 15 (light white)
In mode 3, palette codes 0 and 1 are used and the initial settings of colour code assignments are as follows.
Palette code | Colour code (colour)
0 0 (black)
1 15 (light white)
Colour code assignments to the palette codes can be changed with the PAL command.
Ex)
PAL 0,4 .. Assigns colour code 4 (green) to palette code 0.
PAL 2,7 .. Assigns colour code 7 (white) to palette code 2.
A-3