Sharp MZ-800 - 2.3 Running the Demonstration Program

2.3. Running the Demonstration Program
The cassette provided with your MZ-800 contains a demonstration program, which can be executed
by typing in the following after loading BASIC and advancing the tape until the counter reads 170.
RUN “‘CMT:"' |CR
When the screen display below appears:
RUN ‘'CMT:”
+ PLAY
Press the | PLAY | button.
The demonstration program will now be executed. To stop the program, press the |SHIFT | and
BREAK | keys at the same time. Press the |STOP | button after the tape has stopped.
Note:
The tape will still move after the demonstration program has started.
© Accessory Tape
The accessory tape which is provided with the computer contains the following files.
Side A
SMZ-1ZOIG? ccccseevesesdcsdeve MZ-800 BASIC Interpreter (1Z-016)
“OPENING 800’’.... .. Demonstration program for MZ-800 BASIC
“OPENING DATA’ .. Data for demonstration program
Side A label
Side B
BASIE so siicsvicansvacsasvas MZ-700 BASIC Interpreter (1Z-013)
“OPENING”
“MUSIC” hase
“COLOR PLOTTER”
Side B label ‘ BASIC
| 1Z013 |
SHARP. us:
Demonstration programs for MZ-700 BASIC
2-4