Sharp MZ-800 - 4.1 Keyboard

4.1 Keyboard
4.1.1 Keyboard modes
The MZ-800 keyboard operates in one of the following modes:
* Normal mode: Normally used to input the alphabetic characters, numbers and symbols. This mode
is automatically set when the BASIC interpreter is started or the MZ-800 is reset.
* Shift lock mode: In this mode, all keys excepting through | FS | operate in the SHIFT mode. This
mode is entered when [SHIFT] + is pressed, Pressing
ALPHA | again resets the shift lock mode.
* Graphics mode: Used to input special graphic characters.
Three types of cursor are used to indicate the current keyboard mode.
Wi: Normal mode cursor
@ : Shift lock mode cursor
_. : Graphics mode cursor
4.1.2 Keys
The keyboard has many keys and their functions are as follows:
CYR yy