Sharp MZ-800 User Manual

(1) Character keys
These keys are used to input letters, numerals and graphic characters.
Some character keys are marked with two different characters. These characters are input when the key
is pressed in each of the input modes described above.
Normal mode character ——
[3]: “3”
SHIFT | + [3]: “#”
Graphics mode characters
(3]:(
[SHIFT | + [3]: fg
In the normal mode: when a character key is pressed, either the uppercase type for the letter marked
on the keytop or the lower character on the keytop is input. When the character key is pressed together
with the | SHIFT | key, either the lowercase type for the letter marked on the keytop or the upper character
on the keytop is input.
In the graphics mode: each character key can be used to input either of two different graphic charac-
ters. When a character key is pressed by itself, the graphic character which is input is that shown on
the left side of the corresponding keytop in the figure below. When it is pressed together with the [SHIFT
key, the graphic character which is input is that shown on the right side of the keytop in the figure.
Pressing [1 ],[—],[=], , [CLR | or [HOME ] in this mode inpus fi. Z..8.G@o.
These graphic symbols are not printed on the keys. However, adhesive labels on which graphic sym-
bols are printed are included with the MZ-800. You may find it convenient to stick the labels to the
front of each key, as shown in the two figures.

Sharp MZ-800 Specifications

General

Brand	Sharp
Model	MZ-800
Category	Desktop
Language	English