Sharp MZ-800 User Manual

(2) Special keys
These keys are used to control the computer and set the input mode for the character keys. The special
keys are shaded in the figure below.
y
jittbtey
The functions of the special keys are as follows.
CR : This key is used to enter the line containing the cursor into the computer. Although characters
typed by the character keys are displayed on the screen, the computer ignores them until the
SHIFT | : This key operates keys in the shift mode while it is being held down.
GRAPH] : Pressing this key switches the keyboard to the graphics mode.
ALPHA| : Pressing this key returns the keyboard to the normal mode.
BREAK : This key is used to input an ESC code.
BREAK
SHIFT) + | "Esc
: These keys are used to stop a program during execution or to stop cassette operation.
TAB_|: Advances the cursor to the next tab stop position on the display screen.
CTRL | : Pressing a character key while this key is being held down will enter a control code. For
details of the control codes, see Appendix D.
(3) Editing keys
The editing keys are used for making additions, changes, or deletions in programs. These are keys
located on the right-hand side of the computer. See Section 3.4 for the function of each key.
(4) Definable keys
UC JC UC JC JC =
[Cate is te ts) |
Immediately after the BASIC interpreter has started operating, the following functions are assigned
to the definable keys. You can change the functions of these keys by using DEFKEY statement. See
Chatper 6,

Sharp MZ-800 Specifications

General

Brand	Sharp
Model	MZ-800
Category	Desktop
Language	English