Sharp MZ-800 User Manual

3.6 Loading a Program
The cassette provided with your computer contains a demonstration program, and you can also pur-
chase commercially available programs. To use these programs, plus ones you may have written, you
must load them off the cassette and into the computer’s memory. The procedure for loading program
is described below.
1) Insert the cassette which contains the program into the data recorder. Rewind the tape to the coun-
ter value of the program preceding the program you want if necessary.
2) Enter the following command to load the program into memory.
LOAD “‘CMT:<name of program>’’
For example, to load the program ‘‘TEST”’,
LOAD ‘‘CMT:TEST”’
3) When the message ‘‘ PLAY” appears, press the |PLAY | button on the data recorder.
4) Press the P | button when the tape stops.
5) To execute the program ‘‘TEST’’ now that it has been loaded, enter the RUN command when the
message ‘‘Ready”’ is displayed on the screen.
Ready
RUN |CR
3-12

Sharp MZ-800 Specifications

General

Brand	Sharp
Model	MZ-800
Category	Desktop
Language	English