Sharp MZ-800 - Page 32

3) Press the | FFWD | button. Stop the tape by pressing the |STOP | button when the counter value for
the end of the preceding program nears.
4) Press the | PLAY | button to begin saving the program onto the cassette.
5) Perform steps 2 to 4 of the procedures described above for a new cassette.
6) When the program has been saved, note down the counter value, then run the tape an extra 2 or
3 counter revolutions and press the | STOP | button, When saving programs onto a cassette with exist-
ing programs, there is a possibility that the existing programs may be destroyed when the above
procedures are performed. Therefore, it is recommended that you use a new cassette to save a program.
3-11