Sharp MZ-800 User Manual

Type in the following.
20 PRINT ‘‘SAMPLE PROGRAM” |CR|
30 PRINT “MZ-800" [CR |
40 END (CR.
You already know that in this program the PRINT statement will redisplay the characters between
quotation marks in lines 20 and 30. The END statement informs the BASIC interpreter of the end
of program. Type in RUN and press the |CR | key, the screen will then reappear as shown below.
Note:
From now on, you will frequently see the phrase ‘‘Enter a command or statement”’ (e.g., ‘‘Enter the
RUN command”’). This actually means ‘‘Type in a command or statement, and press the | CR | key’’.
You should remember this.
SAMPLE PROGRAM
MZ-800
Ready
a
Enter the LIST command to display the whole program.
=
SAMPLE PROGRAM
MZ-800
Ready
LIST
10 CLS
20 PRINT ‘‘SAMPLE PROGRAM”
30 PRINT ‘’MZ-800"
40 END
Ready
s
Enter the following command.
NEW |cR|
Then clear the screen by entering the CLS statement.
CLs [cr]
Now enter the LIST command.
LIST [CR]
3-5

Sharp MZ-800 Specifications

General

Brand	Sharp
Model	MZ-800
Category	Desktop
Language	English