Sharp MZ-800 - Page 40

2) Tape handling
* Any commercially available cassette tape can be used with the MZ-800. However, it is recommend-
ed that you use quality cassette tape produced by a reliable manufacturer.
* Use normal type tapes.
* Avoid using C-120 type cassette tapes.
* Use of C-60 or shorter cassette tapes is recommended.
* Be sure to remove slack from the tape by using a pencil or similar object before inserting the tape
into the data recorder.
Stack
* Keep a record of the program name and the counter values for the beginning and end of each pro-
gram after it has been saved.
* Do not store cassette tapes near a TV set or speaker system which generates a magnetic field.
* Protecting programs/data from accidental erasure
To prevent data from being accidentally erased, remove the record lock-out tab from the cassette with
a screwdriver or similar object. This will then make it impossible for the [RECORD | button to be pressed
accidentally, thereby preventing erasure of valuable data or programs.
Remove the record lock-out tab
with a screwdriver,
| Tab for side A oS
Tab for side B
47