Sharp MZ-800 - Page 61

DELETE
Format
Explanation
Abbreviated Format
DELETE [<starting line number> [—] <ending line number>]
DELETE <line number >
D.
Deletes program lines from <starting line Inumber> to <ending line number>.
Example DELETE 150—350 LC. . Deletes all program lines from 150 to 350.
DELETE —100|CR . Deletes all program lines up to line 100.
DELETE 400— [CR ].......... Deletes all program lines from 400 to the end of the
program.
DELETE 150 [CR]............. Deletes line 150.
LIST
Format
Abbreviated Format
LIST [/P] [<starting line number>] [—] [<ending line number >]
Explanation
Example
L.
The LIST command lists on the display screen all or part of the program lines con-
tained in the BASIC text area of the memory.
Output of the program listing to the display screen can be temporarily interrupted
by pressing the space bar; listing is then resumed when the space bar is pressed again.
To terminate the listing, press the + keys.
The program listing can be output to the printer by entering LIST/P.
LIST LC . Lists the entire program.
LIST —30 . Lists all lines of the program up to line 30.
LIST 30— .. Lists all lines of the program from line 30 to the end.
LIST 30— . Lists all lines of the program from line 30 to line 50.
LIST 30 . Lists line 30 of the program.
6-4