EasyManua.ls Logo

Sharp Notevision PG-F212X

Sharp Notevision PG-F212X
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
42
55
55
5 Progressive
In NTSC or PAL60Hz, even if the 3D Progres-
sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally when the film source has been entered.
When the image is blurred or noisy, switch to
the optimal mode.
* The film source is a digital video recording with the
original encoded as is at 24 frames/second. The
projector can convert this film source to progres-
sive video at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with PAL50Hz
and SECAM to play back a high-definition image.
Selectable
items
2D
Progressive
3D
Progressive
Film Mode
Description
Useful to display fast-moving images
such as sports.
Useful to display relatively slow-
moving images such as drama and
documentary more clearly.
Reproduces the image of film source*
clearly. Displays the optimized image of
film transformed with three-two pull down
(NTSC and PAL60Hz) or two-two pull
down (PAL50Hz and SECAM) enhance-
ment to progressive mode images.
Note
77
77
7 Lamp Setting
In the Eco + Quiet mode, the fan sound and
power consumption are lower than those in
the Bright mode. (Projection brightness de-
creases as shown in the chart.)
Note
Selectable
items
Eco + Quiet
Bright
Brightness and Power consumption
PG-F312X Approx. 60%
PG-F262X Approx. 70%
PG-F212X Approx. 80%
100%
Menu operation n Page 38
Picture Adjustment (“Picture” Menu)
(Continued)
66
66
6
Reducing Image Noise (DNR)
Set “DNR” to “Off in the following cases:
When the image is blurry.
When the contours and colors of moving
images drag.
When TV broadcasts with weak signals are
projected.
Note
Selectable
items
Off
Level 1
Level 2
Description
The DNR function is not activated.
Sets the DNR level for viewing a
clearer picture.
Video digital noise reduction (DNR) provides high
quality images with minimal dot crawl and cross
color noise.
This function is available for 480I and 576I
signals using COMPUTER/COMPONENT or
DVI input.
This function is available for all signals with
S-VIDEO and VIDEO input.
Info

Table of Contents

Related product manuals