14
Easy Start
This section shows the basic operation (projector connecting with the computer). For details,
see the page described below for each step.
Setup and Projection
In this section, connection of the projector and the computer is explained using one example.
STANDBY button
8
KEYSTONE button
5
3
ON button
6
INPUT buttons
5
Adjustment
buttons
(P/R/O/Q)
O/Q buttons
6
STANDBY/ON
button
3
8
Focus ring
4
HEIGHT
ADJUST lever
4
Zoom ring
4
INPUT buttons
6
6
1. Place the projector facing a wall or a screen
B
P. 16
When connecting equipment other than a computer, see pages
20 and 21.
2. Connect the projector to the computer and plug the power
cord into the AC socket of the projector
BPP. 19, 21
Press STANDBY/ON on the projector or ON on the remote control.
3. Turn the projector on
BP. 2 3
To Next Page
Loading...
Need help?
General