Sharp NoteVision PG-LS2000 User Manual

21
Connections
Equipment
Terminal on
connected equipment
Cable
Terminal on the
projector
Audio equipment
ø3.5 mm
audio output
terminal
ø3.5 mm stereo minijack to RCA audio cable
(commercially available)
AUDIO
RCA audio
output
terminal
RCA audio cable (commercially available)
Audio
output
terminal
Cables for a camera or a video game
HDMI output
terminal
HDMI cable (commercially available) HDMI
is only for PG-LX2000
You can select HDMI or AUDIO in the INPUT list. (See page 27.)•
Note
This projector is able to process the following signals when connected to HDMI
equipment:
Video signal: For details, see “Digital Support” in the list of “Compatibility Chart” on page 64.
Audio signal: Linear PCM audio
Sampling frequency: 48kHz/44.1kHz/32kHz
•
•
•
Connecting the Power Cord
Plug the supplied power cord into the AC
socket on the rear of the projector. Then
plug into AC outlet.
AC socket
To AC outlet
Power cord
(supplied)
AC socket
To AC outlet
Power cord
(supplied)

Sharp NoteVision PG-LS2000 Specifications

General

Brand	Sharp
Model	NoteVision PG-LS2000
Category	Projector
Language	English