Sharp PJ-TA181 - Component Replacement Procedures; Remove of Grille Assembly; Remove of Hard Board

6
Screw
Base
Hard board
Screw
Power cord
Claw of body
Base
Body
REMOVE OF GRILLE ASS’Y
REMOVE OF HARD BOARD
COMPONENT REPLACEMENT PROCEDURE
1. Unlock the xing lock and pull the front grille.
2. Turn the spinner fan clockwise and remove the blade.
3. Turn the grille lock nut counterclockwise and remove the rear grille.
Fig. 1
Fig. 2
Detach the xing
lock to unlock.
Front grille
Spinner fan
Blade
Grille lock nut
Fixing lock
Rear grille
Motor ass’y
1. Remove the grille ass’y in accordance with “REMOVE OF GRILLE ASS’Y”.
2. Push 3 claws of body and remove the body ass’y from the base.
3. Remove 3 screws holding the hard board.
4. Now the hard board is free.
Leg