8
REMOVE OF MOTOR ASS’Y
1. Remove the grille ass’y in accordance with “REMOVE OF GRILLE ASS’Y”.
2. Remove the hard board in accordance with “REMOVE OF HARD BOARD”.
3. Remove the closed terminal and cut the red lead wise, yellow lead wise and white lead wise from
the piano switch ass’y.
4. Pull the clutch knob from the motor ass’y and remove the motor cover-B.
5. Remove the screw holding the motor cover cap and motor cover-B.
6. Remove 4 screws holding the motor cover-F.
7. Remove the screw holding the link rod to the motor ass’y.
8. Detach the screw holding the motor ass’y to the hinge ass’y and turning axle.
9. Now the motor ass’y is free.
Fig. 4
Clutch knob
Screw
Screw
Motor cover-F
Motor cover-B
Hinge spring
Hinge
Screw
Turning axle
Screw
Link rod
Motor ass’y
Motor cover
cap
To Next Page
Loading...
