Sharp PN-85TH1 - Setup

15
Setup
E
You can configure settings for APPLICATION mode.
Alsocheckthe“MenuItems”intheOperationManualsuchasvideoandaudiosettings.
Display the applications list on the home screen of APPLICATION mode and select “Setup”.
A password enter screen appears. (Factory setting)
Enterapasswordtoreleasethelock.(Thedefaultsettingis“admin”.)
Tochangethepassword,select“ChangePassword”.
(At least 4 characters and no more than 16 characters.)
Thelockreleasestatewillcontinueforapprox.15minutes.
n
Setup
Date & Time
Set the date and time.
Ethernet (LAN)
Set whether or not to use LAN terminal.
SettheIPaddress,subnetmask,andothersettings.
Wireless Region
Select the region to use this monitor.
Wireless LAN
Set whether or not to use wireless LAN.
TousewirelessLAN,firstsetthe“WirelessRegion”.
Configure settings for wireless LAN.
Wireless LAN Profile Backup/Recovery
Save wireless LAN settings.
Bysavingthesettings,youcanreturnthesettingstothesavedsettingsintheeventthatthewirelessLANsettingsarelost.
Thesettingsarereturnedwhenyouturnonthepowerorchange“WirelessLAN”from“Off”to“On”.
Bluetooth
SetwhetherornottouseacommerciallyavailableBluetoothdevice.
Configure settings for Bluetooth.
Telnet Server
Configure settings to use a telnet server.
Telnet Server ................................... Whenusingtelnetserverfunction,settoON.
User Name ...................................... Set an account name when connecting to this monitor.
Password ......................................... Set a password when connecting to this monitor.
Port .................................................. Settheportnumbertobeused.
Auto Logout Time (minutes) ............ Setthetimetologoutautomaticallybyminutes.
Reset ............................................... Initialize the telnet server settings.
Proxy Settings
ProxySettings ................................. Whenusingthismonitorintheproxyenvironment,settoON.
Address ........................................... Setaproxyserver'saddress.
Port .................................................. Setaportnumberwhenconnectingtotheproxyserver.
User Name ...................................... Setanaccountnamewhenconnectingtotheproxyserver.
Password ......................................... Setapasswordwhenconnectingtotheproxyserver.
ExclusionList................................... Settheaddressdonotuseproxyserver.
Reset ............................................... Initializetheproxysettings.
USB Drive/SD Card
Enabled ........................................... Allow the use of USB devices and a microSD memory card.
Disabled........................................... ProhibittheuseofUSBdevicesandamicroSDmemorycard.
Settings/Setup Lock
Whenusing“Settings”or“Setup”,setwhetherornotapasswordisnecessary.
Enabled ........................................... A password is necessary.
Disabled........................................... A password is unnecessary.
Full Screen Mode
Enabled ........................................... Thenavigationbarandstatusbardonotappear.
Disabled........................................... Thenavigationbarandstatusbarappear.