Sharp PN-CD701 - Page 13

13
E
Connecting Peripheral Equipment
8. LAN 2 terminal
• YoucanconnecttotheInternetbyconnectinga
commercially available LAN cable between this terminal
and a network.
9. LAN 1 terminal
• Byconnectingthisterminaltoanetwork,youcanconnect
an external device connected via USB to the network.
10. USB port for storage expansion (USB 3.0 compliant)
• Youcanexpandthestorageusedbythemainsystemon
this terminal by inserting a commercially available USB
storage drive.
11. USB Type C output terminal
• ThisTypeCterminalallowstooutputthevideosource
from this terminal to another USB Type C input terminal
supported display, via a commercially available Type C
cable that support DisplayPort.
12. Optical audio input terminal (S/PDIF)
• Thisterminalisreservedforthehardwareecho
cancellation feature supported by the camera (supplied).
• Connecttheopticalaudiooutputfromthecameraandthis
optical audio input terminal via an S/PDIF cable (supplied).
13. USB port for camera 1
• ConnectthecameratothisterminalwiththeUSBAtoB
cable (supplied).
14. USB port for external source (USB 3.0 compliant)
• ConnectaUSBdevicetothisterminal.
• ThisUSBinputterminalservesanextensionofthe
external source devices.
15. USB port for external source (USB 3.0 compliant)
• ConnectaUSBdevicetothisterminal.
16. 3.5 mm jack for service
• Onlyforservicetechnicians.
17. USB port for camera 2
• Connectthecameratothisterminalwiththe3.5mmmini
jack to USB A cable (supplied).