Sharp PN-CD701

22
E
Basic Operation
4
5
8
6
1
2
7
39
1. POWER
When “Operation Mode” is set to “Mode1”
Press the POWER button to turn the power OFF (standby
mode).
When “Operation Mode” is set to “Mode2”
When you press the POWER button, the backlight will be
turned off.
2. MUTE
Turns off the volume temporarily.
Press the MUTE button again to turn the sound back to
the previous level.
3. VOLUME +/- (Volume adjustment)
Pressing+or-displaystheVOLUMEmenu.
Press+or-toadjustthevolume.
4. INPUT (Input mode selection)
Each time you press this button, the input mode changes.
5. MENU
Displays and turns off the menu screen.
6. Cursor
These buttons are used to perform operations such as
selecting items, changing adjustment values, and moving
the cursor.
7. ENTER
Confirms the setting.
8. RETURN
Returns to the previous screen.
9. BRIGHT +/- (Brightness adjustment)
Press+or-toadjustthebrightness.
TIPS
• Otherbuttonsarenotusedonthismonitor.
Using the remote control unit (option)