13
E
Attaching the USB ash drive cover
1. Insert the USB ash drive into the USB port.
2. Attach the USB ash drive cover and secure with the provided screws (x2).
w
TIPS
• If the USB ash drive cover will be attached, use a USB ash drive with dimensions no greater than 1-15/16 inch (50 mm) (L)
(including the terminal) × 13/16 inch (20 mm) (W) × 1/2 inch (12 mm) (H).
Attaching the logo sticker
You can attach the supplied logo sticker on this monitor.
Refer to the following example to attach the sticker as necessary.
Example for landscape orientation
Example for portrait orientation
To Next Page
Loading...
