16
E
Turning Power On/O
n
Power save mode
When the monitor is turned on for the rst time after being
shipped from the factory, the power save mode setting screen
will be displayed. Set it to YES or NO.
YES .........POWER SAVE MODE is set to ON.
Standby state is standby mode.
Current consumption is reduced while the monitor
is in standby state. Note, however, that the startup
time from standby state becomes longer.
NO ...........POWER SAVE MODE is set to OFF.
Standby state is networked standby mode. Startup
time from standby state is reduced. Note, however,
that more power will be consumed in standby state.
n
Date/time setting
• If the time has yet to be set when the monitor is rst turned
on, the date/time setting screen appears. Set the date and
time.
• Be sure to set the date and time.
TIPS
• The clock stops if the main power remains o for about 1
week.*
(*Approximate time. The actual time varies depending on
the state of the monitor.)
To Next Page
Loading...
