Sharp PN-HS551

26
E
Menu Items
MONITOR BUTTONS LOCK
You can disable the monitor buttons.
To disable MONITOR BUTTONS LOCK, press the FUNCTION button and then press the
, , and buttons in this
sequence.
REMOTE CONTROL LOCK
You can disable the remote control unit buttons.
UNLOCKED............................ Enable the remote control unit buttons.
LOCK ALL ............................... Disable remote control unit buttons.
LOCK EXCEPT VOLUME ...... Disable remote control unit buttons except volume adjustment buttons.
LOCK EXCEPT POWER ........ Disable remote control unit buttons except POWER button.
To disable REMOTE CONTROL LOCK, press the FUNCTION button and then press the
, , and buttons in this
sequence before REMOTE CONTROL LOCK disappears.
THERMAL SENSOR SETTING
Select the installation direction of the monitor.
LANDSCAPE ............Landscape orientation
PORTRAIT ...............Portrait orientation
FACE UP ..................Screen faces up
FACE DOWN ............Screen faces down
LED
Species whether to light the power LED.
INFORMATION
Displays monitor information.
ROTATE 180°
If video is upside down when the monitor is installed in portrait orientation, you can rotate the video 180 degrees.
Interlaced signals may not be displayed properly.
ALL RESET
Resets the settings to the factory default settings.
TIPS
• When WHITE BALANCE is set to THRU, BLACK LEVEL, CONTRAST, TINT, COLORS, GAMMA, PRESET, USER and
ACTIVE CONTRAST cannot be set.
• If COLOR MODE is set to sRGB, the following items cannot be set.
WHITE BALANCE, PRESET, USER, ACTIVE CONTRAST, and GAMMA
• When the COLOR MODE is set to VIVID or HIGH ILLUMINANCE, GAMMA cannot be adjusted.
n
SCHEDULE
You can set the time to switch the monitor on and o󰀨.
An auto play le in a USB ash drive (see page 21) can also
be played at a specied time.
Set this function with SCHEDULE in the SETUP menu. (See
page 24.)
1.
Insert the USB ash drive to be played into USB port on
the monitor when playing les. (See page 10.)
2. Press the or button to select the SCHEDULE
number, and press the ENTER button.
3. Set the SCHEDULE. (See below)
Move through the items with the
or button, and set
each item.
4. Press the MENU button.
SCHEDULE becomes e󰀨ective.
(1) ON/OFF
Enable/disable the SCHEDULE.
(2) ON TIME
Specify the time the power turns on.
Set the time with the
, , or button and press the
RETURN button.
(3) OFF TIME
Specify the time the power turns o󰀨.
Set the time with the
, , or button and press the
RETURN button.
(4) REPEAT MODES
Select the day of the week the schedule will be executed.
Press the ENTER button to change the setting, and press
the RETURN button.
• ONLY ONCE
The SCHEDULE will be executed once only regardless of
the day of the week. When the schedule is set to ONLY
ONCE, the setting is cleared after the schedule is executed.
• EVERY SUN - EVERY SAT
Executes the SCHEDULE on the specied day every
week.
Multiple days of the week can be specied.
(5) INPUT
Specify the input mode at power on.