Sharp PN-K321 Setup Manual

8
E
• Wheninstalling,removingormovingthemonitor,ensurethatthisiscarriedoutbyatleast2people.
• Besuretouseawall-mountbracketdesignedordesignatedformountingthemonitor.
• Thismonitorisdesignedtobeinstalledonaconcretewallorpillar.Reinforcedworkmightbenecessaryforsomematerials
suchasplaster/thinplasticboard/woodbeforestartinginstallation.
Thismonitorandbracketmustbeinstalledonawallwhichcanendureatleast4timesormoretheweightofthemonitor.
Installbythemostsuitablemethodforthematerialandthestructure.
• ToattachaVESA-compliantmountingbracket,useM6screwsthatare5/16inch(8mm)to3/8inch(10mm)longerthanthe
thicknessofthemountingbracket.
• Donotuseanimpactdriver.
• Whenmovingthemonitor,besuretoholditwiththeunitbottomandthesideofunit.DonotholdtheLCDpanelorcorners.
Thismaycauseproductdamage,failure,orinjury.
• DonotuseanyscrewholesotherthanVESAholesforinstallation.
Model PN-K321
Powerrequirement AC100V-240V,50/60Hz(whenusingthesuppliedACadapter)
Operatingtemperature 32°Fto104°F(0°Cto40°C)
Operatinghumidity 20%to80%(nocondensation)
Powerconsumption 93W*(whenusingthesuppliedACadapter)
Dimensions(excludingprotrusions) inch(mm)
Approx.29-17/32(W)x1-25/64(D)x17-3/8(H)(750x35x441)(monitoronly)
Approx.29-17/32(W)x10-3/32(D)x19-17/64~24-31/32(H)
(750x256x489~634)(monitoronsuppliedstand)
Weight lbs.(kg) Approx.16.5(7.5)(monitoronly)
Approx.28.7(13.0)(monitoronsuppliedstand)
* WhenusingthemonitorinDC19.5V:87W
Asapartofourpolicyofcontinuousimprovement,SHARPreservestherighttomakedesignandspecicationchangesforproductimprovement
withoutpriornotice.Theperformancespecicationguresindicatedarenominalvaluesofproductionunits.Theremaybesomedeviationsfrom
thesevaluesinindividualunits.
Specications
Mounting Precautions (For SHARP dealers and service engineers)

Sharp PN-K321 Specifications

General

Brand	Sharp
Model	PN-K321
Category	Monitor
Language	English