SERVICE MANUAL
CODE: 00ZPNK321SM2E
LCD MONITOR
MODEL PN-K321/K321H/K322B/K322BH
CHAPTER 1. OUTLINE OF THE PRODUCT ······················································· 1-1
CHAPTER 2. INSTALLATION,ADJUSTMENT,SETTING ··································· 2-1
CHAPTER 3. INPORTANT INFORMATION FOR SERVICING THE DISPLAY ··· 3-1
CHAPTER 4.
SERVICE MENU/VARIOUS SETTING TOOL OPERATING PROCEDURES
······· 4-1
CHAPTER 5. FIRMWARE UPDATE PROCEDURES ·········································· 5-1
CHAPTER 6. DISASSEMBLY AND ASSEMBLY ················································ 6-1
CHAPTER 7. TOROUBLESHOOTING ································································ 7-1
CHAPTER 8. HARDWARE DESVCRIPTIONS ···················································· 8-1
SHARP CORPORATION
CONTENT
his document has been published to be used for
after sales service only.
The contents are subject to change without notice.
Parts marked with “!” are important for maintaining the safety of the set. Be sure to replace these
parts with specified ones for maintaining the safety and performance of the set.
To Next Page
