Sharp PN-K321 Service Manual

CHAPTER 6. DISASSEMBLY AND ASSEMBLY
PN-K321/K322B DISASSEMBLY AND ASSEMBLY 6 – 4
4. DC-DC PWB
1 ) Refer to [2. REAR COVER] and remve the rear cover.
2 ) Disconnect four connectors, remove four screws (M3 x 6 3W), and remove DC-DC PWB.
CAUTION
SCREW TIGHTENING TORQUE
・0.4 - 0.6N•m
5. LED DRIVE PWB
1 ) Refer to [2. REAR COVER] and remve the rear cover.
2 ) Disconnect three connectors, remove four screws (M3 x 6 3W), and remove the LED Drive PWB
CAUTION
SCREW TIGHTENING TORQUE
・0.4 - 0.6N•m

Sharp PN-K321 Specifications

General

Brand	Sharp
Model	PN-K321
Category	Monitor
Language	English