Sharp PN-L Series User Manual

39
E
n
Moving an object
You can move an object by selecting the object and dragging it.
(Page 37)
TIPS
• To manipulate multiple objects at once, follow the steps in “Selecting multiple objects” (page 38).
n
Enlarging/reducing an object
1. Select an object. (Page 37)
2. Drag the select point.
• Dragging the select point on the vertex enlarges/reduces
the object with the same aspect ratio.
• Dragging the select point on the side enlarges/reduces the
object in the direction of either width or height.
* There is no select point on the side of a text box.
• The line width remains the same after the object is
enlarged/reduced.
• When a text box is enlarged or reduced, the font size is
also enlarged or reduced.
Select point
TIPS
• You can also zoom in and out by gesture.
Touch a selected object with two fingers and move them together to zoom out. Spread your fingers apart to zoom in.
• To manipulate multiple objects at once, follow the steps in “Selecting multiple objects” (page 38).
n
Rotating an object
1. Select an object. (Page 37)
2. Drag the select point at the center top.
Or, select
“Rotate Right”, “Rotate Left” or
“Rotate 180 degrees” from “Rotate” from the
expansion menu.
Select point
TIPS
• You can also rotate by specifying an angle of rotation.
• You can also rotate by gesture.
While selecting the object, touch the display with two fingers and move the fingers in the desired direction of rotation.
• To manipulate multiple objects at once, follow the steps in “Selecting multiple objects” (page 38).
n
Copying an object
You can copy an object to the clipboard.
1. Select an object. (Page 37)
2. Select
“Copy” from the expansion menu.
TIPS
• A copied object can be pasted into Word, Excel, PowerPoint, and other applications.
• To manipulate multiple objects at once, follow the steps in “Selecting multiple objects” (page 38).

Sharp PN-L Series Specifications

General

Brand	Sharp
Model	PN-L Series
Category	Monitor
Language	English