56
E
Customizing the Settings
You can customize various settings of this software.
The settings are the same in both whiteboard mode and overlay mode. However, the contents of the screen will vary depending
on which mode is started.
TIPS
• If “Share software settings with all users” is selected during installation, the settings will be the same for all users.
1. Touch the “Settings” button (
) on the toolbar.
2. Set the options as necessary. (See below.)
3. When you nish adjusting the settings, touch “OK”.
n
Basic
TIPS
• When this software is restarted or new boards are created / added, setting will be reected.
(1)
(2)
(3)
(4)
(5)
(1) Menu
Select “Square Menu”, “Classic Menu” or “Floating Menu” for the menu format. (Pages 8 to 10)
(2) Menu Size (Valid for 4K display only)
Set the size of the menu.
(3) Icon Size
Set the icon size in the square menu and classic menu.
(4) Color Universal Design
When set to “Enable”, color and line width will change to enable better visibility for most people, regardless of differences of
color vision between individuals. When set to “Disable”, the text and line drawing function will change as follows:
• Selectable line colors will change. (Page 29, 31, 32, 33)
• You will be able to draw ner lines. (Page 29, 31, 32)
• You will be able to select “Custom” for line color and width. (Page 29, 31, 32, 33)
• Background colors that can be set in “Background of new sheet” will increase. (Page 63)
(
5) Restore Default Settings
Reset the settings to the initial values.
TIPS
• Language (page 65) and Color Universal Design will not reset to the default setting.
To Next Page
Loading...
Need help?
General
