Sharp PN-L751H

17
Updating the Software (Update)
E
Updateapplicationsandfirmwarethatarefactory-installedinAPPLICATIONmode.(Anetworkenvironmentthatallowsaccess
totheinternetisrequired.)
Display the applications list on the home screen of APPLICATION mode and select “Update”.
ThefirsttimeyoustarttheUpdate,aregionselectionscreenwillappear.Selectyourregion.
The“ExportLawAssurances”appears.Select“YES”.
Tousethesoftwaredistributedbythe“Update”,youmustagreetothe“ExportLawAssurances”.
1
2 345 6
1. Information area
Showsinformationonalreadydownloadedsoftwareandsoftwarethatcanbedownloaded.
2. Reload
Refreshtheinformationintheinformationarea.
3. Select all
All software in the list are selected.
Ifalreadyselected,theselectioniscanceled.
4. Download
Download the selected software.
5. Install
Install the selected software.
6. Settings
Configure settings for Update.
•Region ..........................................................Selectregiontobeused.
•Showwarningmessages .............................Set whether or not to display warning message.
•Hideupdateditems ......................................Set whether or not to hide updated items in the information area.
•Scheduledinstallation ..................................Setwhetherornotupdatesareautomaticallycheckedforandexecuted.
•Scheduledinstalltime ..................................When“Scheduledinstallation”issetto“ON”,setthetimeatwhichupdatesare
executed.Updaterunseverydayatthesettime.
•Scheduledfirmwareinstallation ....................When“Scheduledinstallation”issetto“ON”,setwhetherornotthefirmware
is also updated automatically.
•Reset ............................................................Initialize the “Settings”.