27
E
Basic Operation
10. Buttons for playing the files or operating the HDMI-
connected device
When used for playing the files, the buttons that can be used
vary depending on the file that is played.
When “HDMI CEC link” is set to on, you can operate devices
that support HDMI CEC when the input mode is HDMI.
CONTENT MENU button
• When input mode is APPLICATION
- The home screen of APPLICATION mode appears.
• When “HDMI CEC link” is set to on and input mode is HDMI
- Operate devices that support HDMI CEC.
• When “HDMI CEC link” is set to off and input mode is other
than APPLICATION
- The input mode changes to APPLICATION.
11. ID SET
This is not used with this monitor.
12. OPTION
Switch the input mode to APPLICATION or OPS.
13. DP (DisplayPort)
Switch the input mode to DisplayPort or USB-C.
14. SIZE (Screen size selection)
In video input mode (other than APPLICATION), each time
you press this button, screen size is changed. (See page 28.)
15. PIP/PbyP
This is not used with this monitor.
16. BRIGHT +/- (Brightness adjustment)
Press + or - to adjust the brightness.
17. INPUT (Input mode selection)
The menu is displayed.
Press the or button to select the input mode, and
press the ENTER button to enter.
• For the input modes that can be selected, see “About the
home screen of APPLICATION mode” (see page 23).
18. MENU
The “Picture” screen of the General menu is displayed. (See
page 48.)
19. Cursor
These buttons are used to perform operations such as
selecting items, changing adjustment values, and moving the
cursor.
20. RETURN
Returns to the previous screen.
To Next Page
Loading...
